Tapping machine

Homologous Machinery Co., Ltd. Weifang

Product Categories

Friendly Links

home > Supply > Tapping machine

Tapping machine

Information Name:	Tapping machine
Published:	2005-06-13
Validity:	1000
Specifications:	All
Quantity:	0.00
Price Description:	Interviews
Detailed Product Description：	1. Plug in the power, open the motor switch, check equipment operating conditions, confirm the normal operation after the shutdown. 2, the cavalry on the base of the machine attached to pipes Hill, and then adjust the length of the chain, and with the latch position, then tighten the nuts the other end of the chain, so that the positioning of the machine firmly in the pipeline. 3, confirm the required hole diameter, clamping a suitable opening device. 4, start the motor, confirm the openings in the second machine, opening device is operating normally. 5, flip (pressure) by the handle, slowly down the hole saw, close to the tube, the look is correct hole location, on the contrary, should be shut down to re-adjust the location in the boot. 6, the opening, the handle under the pressure should be slow and continuous cooling with the coolant openings. 7, opening after the end off the motor, remove the machine, handle with care, not on the ground dragging the machine. 8, the company can price a variety of openings. 9, precautions, due to wear of drill holes, when the hole size below the calibration hole size, drill holes for scrap.

Admin>>>
You are the 4264 visitor
Copyright © GuangDong ICP No. 10089450, Homologous Machinery Co., Ltd. Weifang All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility